XT6 (72Lx24Dx24H) - STACKABLE

RHP - Radient Heat Panel - is used for the warm side of the enclosure. This usually is all the heat you will need. You can also install additional Lamp Holders for additional heating if your ambient temps are below 68. Please contact us if you think you need additional heating options.

Lighting Options - Arcadia UVB or Vivarium Electronics LED with dimmer switch - you do not need to order both. 

Screen Cut-Outs - are used for dome lighting - you can set your heat emitters or whichever bulbs you choose to use on top of the screen.

Arcadia Lamp Holder Pro - No Bulb - used to mount inside of the enclosure. You can purchase caging to go over the lamp holder which will protect your animals. You can use whichever bulb you wish in this lamp holder. Heat emitters, Deep heat projectors, etc.

Typical Set-Ups

• Ball Python Set Up - RHP+(LED or UVB)
• BOA Set Up - RHP+(LED or UVB)
• Bearded Dragon Set Up - RHP+UVB+Basking bulb holder (Lamp Holder Pro for inside mount and screen cutout for external dome fixtures)

You can create whichever set-up you like. If you have questions about what you need for a specific animal, please do not hesistate to contact us via messenger or email. We are ususally very quick to respond. UVB lighting for certain snakes have been deemed not needed, however, we have noticed that in every enclosure we have installed UVB, they always use it for basking.

Local Pick-Up - At checkout, choose pick-up and we will email you to set up a pickup time and location.

Shipping - XT4 and smaller (unless you are ordering multiple) - Calculated at checkout. We ship to all of the United States

Freight - Calculated at checkout. We freight to all of the United States. To get the best freight pricing, it is best to ship to a business address.

Freighting Racks - All our racks come freighted assembled. If you think you will need 2 racks, the difference in freight cost is minimal so it's best to order two at once to get the most out of your freight costs.

Freighting Multiple Enclosures - If you are purchasing several enclosures, the freight calculations will be based on flat pack freighting. Please contact us if you would like a price for assembled enclosures the difference in cost usually isn't very much.

GENERAL ORDER QUESTIONS

What if I’m not exactly sure what size set up I need or what add-ons are necessary? 

Send us a message or an email and we’ll be happy to help get you set up in the right direction. 

Can you do custom sized enclosures or racks?

At this time, we are not doing custom sizes. We are currently trying to build our catalog. If there is a common size we do not offer, please feel free to send us a message and let us know. We will let you know if we can accommodate your request.

How long will it take to get my order, what is your lead time?

We try to keep our lead times as short as possible but they will vary due to order volumes. Having said that they are typically only a week or so depending on order size and if we are prepping for a show. You can find our current lead time at the top of the home page.

Why do you use thicker PVC on the bigger enclosures? 

We use the thicker PVC for structural integrity as well as aesthetics. Allows us to add casters directly on the bottom of the cage without having sagging or bowing issues.

Can I get my rack or cage in white PVC as well?

Yes, we offer both black and white as color options to suit your preference!

What thickness PVC do you use for your enclosures?

We use ½” for XT4’s and smaller. XT5 and larger are all made of ¾” and in some cases we use some 1” PVC.

ACCESSORIES

What is an 8.5” screen cutout?

A screen cutout is a round hole with mesh cutout on the top of the enclosure so you can use an external dome fixture for heating and or UVB.

What is a Lamp Holder Pro?

A lamp holder pro is a fixture that mounts inside the enclosure for heat or UVB bulbs. We do not provide the bulbs.

What is a Radiant Heat Panel?

A RHP is a heat source that is mounted on the top of the enclosure. This allows the heat to radiate down for your animals. A piece of slate can be placed directly under the heat panel so the animals can get belly heat as well. A thermostat is used with the RHP to control the temperature.

What types of LEDs do you use?

We use two types of LED. 

• A regular low level Vivarium Electronics LED with dimmer switch that is used for viewing purposes

• Arcadia LED that is used for growing plants in a BIOACTIVE set-up. Please ask if you do not see this as an option.

Do I need a UVB?

We suggest doing as much research as possible before placing your order. There are certain reptiles that do REQUIRE a UVB. However, there is much controversy about UVB and certain species of snakes. What we have found is that for every enclosure that has an installed UVB, the snakes always use it for basking. This is a decision that you will need to make. If you have any other questions, please feel free to email us.

Do I need LOCKS?

If you are trying to keep humans out or you have a very pushy animal, we do recommend adding locks. We use turn buttons on each enclosure that will keep the average snake safe inside the enclosure.

Do you offer sliding glass doors?

We have considered sliding glass. However, tempered glass is very expensive and in order to keep costs lower, we opted for acrylic. We will be possibly offering sliding acrylic in the near future. Feel free to contact us for more information.

CLEANING

How should I clean the windows of my enclosures?

We recommend using simple soap and water or a dedicated acrylic cleaner to keep those windows looking new! 

How do I clean my enclosure?

You can use just about anything to clean the PVC that is safe for your animals.

THERMOSTATS & HEATING

Do I need a thermostat?

If you are adding heat to your enclosure or racks, you will definitely need a thermostat to keep your animals as comfortable and safe as possible.

How should I configure my INKBIRD controller to get the best possible temps in my cages or rack systems?

Cooling Delay set to 1

Heating Delay set to 1

PT set to 0

How do I set up my radiant heat panel to the thermostat? 

The steps here are pretty simple. The plug that goes from the heat panel plugs into the outlet on the thermostat and then from the thermostat to the wall. DO NOT just plug the heat panel into the wall without the thermostat, this is a guaranteed way to kill your animal! RHPs without a thermostat get incredibly hot and are unsafe for the animal! 

Where should I place my probe for my rack system?

This is also incredibly important and something to be smart about. In a rack, we recommend the probe gets taped directly to the heat tape on one of the black bars with HVAC or aluminum tape with no gap between the probe and the heat tape. 

Where should I place my probe for my enclosure?

In a cage with a heat panel, place the probe in the location where you want the temperature to be most accurate/maintained. For example, if you have a basking area that you want to be 95 degrees, then you would put the probe on top of the basking area and set the thermostat to 95 degrees. Make sure you secure your probe so your animal doesn’t move it. 

My RHP is not getting hot

Make sure the plug is secure going into the heat panel itself, sometimes the animals like to pull them out. The newer heat panels have a plastic clip to eliminate this issue. 

Test the RHP by plugging it directly into the wall outlet, do not leave it plugged in without a thermostat. This is for testing purposes only. If it gets hot plugged into the wall, it is not your heat panel. If you are running a herpstat 4, make sure the output you have the panel plugged into is set up for heat dimming or heat pulse in the set up menu. Also make sure your temperature probe is plugged in firmly and the probe end is situated under the panel.

RACK SYSTEMS

What is a TOE KICK?

A toe kick is a small platform that forms an air gap and raises the rack off the floor so the bottom tub doesn't get too cold. You secure the rack to the toe kick with metal dowels which we provide.

What is a CASTER DOLLY?

A caster dolly is a cart with wheels that performs the same function as the toe kick except on wheels which makes life easier.

Where should I place my probe for my rack system?

This is also incredibly important and something to be smart about. In a rack, we recommend the probe gets taped directly to the heat tape on one of the black bars with HVAC or aluminum tape with no gap between the probe and the heat tape. 

What thickness PVC do you use for your rack systems?

We use ½” PVC for all of our rack systems. We use NOTHING thinner than ½”.

Do your rack systems have full sides?

Absolutely!

SHIPPING

Will my order come assembled?

If you are local to GA, you can arrange a pick-up and your order will be assembled and silicone will be applied. All cages that are shipped out with the exception of XT3 only, are flat packed. For rack systems, we assemble and install heat tape to freight or local pick up.

How will I receive my order if it is shipped?

You will receive your box flat packed with instructions, screws and a small bottle of silicone.

Can I receive my rack unassembled?

Unfortunately, due to the weight of the products, UPS will not take them so either way they will have to be freighted. It is the same price to freight assembled or unassembled so we will only freight assembled.

Can I receive my cages assembled even if I have them shipped?

Yes, if you have them freighted, you most certainly can receive them assembled. Please contact us if you need help with this option.

How do I get the most out of my freight money?

If you are planning on ordering a second rack in the near future, you might want to wait (if you can) and order both at the same time.

• Ordering two racks has a very small freight increase.
• If you have a business address where you can receive your shipment, that tends to lower the price as well.
• Plan to pick up your freight at a local freight terminal.

Can I pick up my order locally? 

YES! You can arrange a pickup with us at the following locations.

• BlackBox Cages & Rack Systems, Buford GA
• Reigning Reptiles, Buford GA
• Exotic Envy, Dallas GA
• GHC Exotics, Cleveland GA